i hear u guys askin whats the speakers tuned for, an yall got all these equations an stuff.6ut can some1 simplify some of dat for me.
i just want 2 know a couple things.
what tune hits a pretty hard 6ass an what ohm speaker an wiring is used to accomplish dat?
what hits hard for speakers 6ridged or in series with the right amp or amps?
i kno yall pro6a6ly dont wanna answer 6ut if any1 can lead me in the halfway right dirrection id apreciate it.

Tune is the frequency (ported,bandpass) where the sub amplifies the sound with the help of the port tuning.

If your box is tuned to 33Hz, when you hit a 33hz (or in close range) you will get a gain in sound.

Lower/Mid 30's is ideal for most bass heads/hip hop

Ohm has nothing to do wit how loud something is. Ohm is wiring configuration to the amp. 1ohm is the most common, lowest impendence(ohm) that is ran safely and with most sub amps.

Bridged/Series is with ohm/impendance, nothing to do with sound.

But the lower your ohm, the more power you get from your amp,

6et. so if i do the 8 sealed 4 ohm 10's. i need 2 amps that are 1600 rms at 1ohm amps to put 400rms 2 all the su6s? which will drop my ohm 6ridged or series in a app. like dat?

8 dual 4 ohm subs wired togther gives you a final 2 ohm load.

That audiopipe 3k will be all you need for all 8. its a 2 channel (wits 2 audiopipe 1500's under one casing)

6et.i hope dis shit work for me.lol.

Pulls out Glock, applies to forehead, pulls the trigger....

hears click, remembers that the chamber is empty, starts to cry.....

knowing my luck, prob,...

but seriously, whats this like the 3rd or 4th thread?? Not to mention, several people have told you what you need to do. I didnt bother posting a response because the question was answered IMO.

real talk i don't know why yall explaining shit, when all of this can be searched n read

well look at the question.im talkin 6out tunin now,not 6lowthru or anything like dat.

man if i could read an figure dat shit out i wouldnt 6e askin you.yall act like yall da experts so i asked yall.aint like u got shit else 2 do while u on here.
yea yall answer my question wit all kind of other shit.all theses eqautions an 6ig words an shit. all i want is a raw answers.

yall act like er6ody know 6out all this 6lowthru shit an shit. yall nigga always dwnin niggas shit an then when a nigga try to come correct yall aint trynna give a straight answer.

dude dez gave you a solution 8 10s facing up with a shell, overthem with the port of the shell through the seat, a blowthrough can be done with subs facing up facing up or facing forward towards the cabin, your not going to be able to do this shit yourself, unless your good with numbers and figures, hell alot of shops can't even do this shit, shit takes time to learn, and alot of falling and getting back up trial and error, what i advise you to do is take that shit to a reputable shop or person, and get that shit done, alot things in audio land are a hit or a miss, only sure application in my mind is sealed, you just can't fuck up a sealed application lol

aint no repita6le shops.me an my niggas do all the custome shit round here.u just told me more in that whole sentance than the whole topic. dats all i wantted 2 know. was can i seal em pointin at the trunk for sound 2 come out the mouth.

Thank CV02.

bos7985465132 , the box is sealed that i drew up. just go by what I drew, you dont need nothing else but to buy the equiptment and put it together.

cool.im on it. i just need to know how deep the cover over the woofer should 6e.
yep lowes got dat mdf an hopefully them niggas at lowes can give me some extra cuts this time.

New setup.

is dat da answer to the right depth?

look in the other thread