ayye thinking bout picking up dis Rockford T20001bd ..wondering if i can be ran below 1 ohm ..i got 4 12" im tryna run at 0.5ohms ..is that too low for the rockford heard it done before but aint sure

Caps since you like "All knowing" when it comes to audio what you think ?

Make sure your electrical can handle it.

how is 140 amp alt ..walmart diehard 1000 cca battery up front..and a bluetop in the rear sound??

I dont think so. Not for 0.5 anyways,

i personally wouldnt run it unless your getting a deal, here;
http://www.db-r.com/sell/store2/index.php?...products_id=225

heeeeeeelll naw. Dont eve try to run any RF amp @ half ohm. Even f u got the electical system to support it......dont ty it. 0.7ohm is ok due to rise. But anything lower than that and ...POOF!!!!!. Just ask Meade what happened to 2 of his Rockford T4Ks when he tried to squeeze a half ohm load on them. He'll be the first to tell u not to try it. And "NOBODY" on here has more experience with Rockford than him. Even if u got the amp frm a dealer and u have a full warranty. Its going to be voided once they crack it open and look in it. They can tell if u droped the ohm too low. Thats a automatic warranty void with RF......

Meade dont wanna see me.

lol, seriously. RF Power series amps ar good as hell. Espcially the smaller ones cause even he 4ch Power series amps can be droped to 1ohm. Which is rare for 4ch amps. But once u start talking bout half ohm and shit like dat. U need to look else where cause if aint going to happen with them. Everybody I know that tried it got a rude awakening and they had electrical systems to support half ohm loads. If u wanna run half ohm Id lok into IA or Cliff Designs. Something along those lines. They are half ohm stable

Well I dont think I will ever have a desire to run half ohms.

im not sure but i think theres a power akustic and orion amp that is 0.5 ohm stable but not sure i know power akustic has a sub that can handle it but i do know that their are at least 2 orther brands i heard of before other than IA and Cliff Designs that didnt clip and over heat at 0.5 ohm

Its quite a few tat can run that low.

i know i was just helping dude out to look for some brands i dont know if really wants to do 0.5 ohm load but you need to know some brands thats out there idk them all but i know them and some others those are just the ones i can remeber off the top of my head

Thats cool.

you see through his bs too dont you?

you dont know what i know. i know more than im typing and telling ya i just dont want people from chattanooga that skim through the forums know what im do wit my car this year i shut every one down with the last system i had last year and all i spent was $579 and that was for everything mids,highs,lows,wires, and power so im not sitting on the side of the street with a dead battery but no one touched my chevy out here system wise but no lie anyone and every one else outside of chatt actully beat it and so you know i was able to cop 4 brand new jackhammers out the box last year with 2 crunch amps at a local shop for $125 brand new with a 2 yr warranty on all of it the mids and highs cost me $150 anad they were some emerince's with a 4 ch crunch amp also with some tweeters they were some pioneers my eq and deck cost me $150 and it was a 7" pioneer flip out and $154 on all wires batterys and a alternator and hooked everything up my self

aite appricate da info ..was getting it for da low anyway