This box came in with 22's. Never got a pic of it but here's when I started to take it apart.

Adding some adjustable trailing arms for the back, modifying the exhaust system and swapin' the stock spindles for a 4" lifted spindles.

You may get told that its 2009 and you shouldn't be lifting.

Here's the pix of the exhaust getting it out of the way of the ruber and the driveline.

I get told alot of stuff all the time but I'm still here. What does that have to do with the year?

Next was upgrading the rotors and calipers, make sure I got enough clearence and test drive it.

couple more just 'cause.

I'm not to sure, that's what I been told for having mines lifted and it being 2009. Like it really matters. But that bit looks good, when I first read the title I thought u was askin how to lift it tho.

Yeah, I just read the title again and it kinda works both ways. I should've written "The process to lift a box" or something like that but what's done it's done.

Nice box!!

thats a clean ass box

what size cups u put on the rear thanks

what spindle did you use. is the 1500 spindle, or the ones that you can get from ucl?

Its a 1500 on there!!

1'' on bottom and 4" on top. 1500 spindles for the front.

That's a clean box's..To me it looks like its sittin just right !! Good job

yo rick, do you know wat size are your trailing arms are? ( just trying to get an idea on how many inches my trailing arms need to be when the factory trailing arms get rewelded.)

1 1/4" on the bottoms and 2" on the tops.

Preciate it rick. dat box sitting right by the way

what do you mean by this? you got 2 different cups on the back?



what do you mean by this? you got 2 different cups on the back?

nice box

i like it

i kno this is a old topic but i was wondering how is that thing driving. is it a smooth ride or bouncy.

Thats a CLEAN RIDE ..he did the install right,no tension on the springs, so if he has shocks in.i bet it rides nice..

It actually drives smoth, not bouncy at all. Shocks were installed all the way around.

thats why i want a spindle lift, but they don't come as small as i need the lift to be

what size were you looking for?

i don't want the front no higher than 3"s and trace said thats not possible

what kindda car is this that you wanna lift?

a bubble, but i need it's low around 2.5" to 3" for the front, but i was told the spindle is gonna make it higher than that so, i guess i'm stuck with the cups