whats tha difference in tha two foreal i don't understand does one out perform the other, or do they perform on tha same level but one brand is a lil bit cheaper, and do they make either in some 5" or 6" for tha doors, i was gone deck my insides out with memphis m-class, but i keep thinking bout how them selenium and eminence sounded when i was in fla, and that shit sounded good and now i think thats tha route i should take, so i cn bring some new shit to these bama boys ears cause dont'nobody up here rock them and don't know body up here bring that concert sound to tha block, up here it's all about bass so i'm trying to kick something off, and a site where i could find them at would be nice
caps
Oct 29 2008, 07:35 PM
selenium sounds better
partsexpress.com
crownvic02
Oct 29 2008, 07:43 PM
ok i found a site parts-express that sells them both, and only selenium makes 6inch drivers, Selenium 6W4P 6" Woofer is that tha correct driver i'm suppose to be looking at.................and what else would i need to bring the sound stage together pretty good, or is that all really for tha basic setup or is there anything extra, and should i take out my co-axial would that make it sound kinda crazy with running both
caps
Oct 29 2008, 07:49 PM
QUOTE (crownvic02 @ Oct 29 2008, 08:43 PM)
ok i found a site parts-express that sells them both, and only selenium makes 6inch drivers, Selenium 6W4P 6" Woofer is that tha correct driver i'm suppose to be looking at.................and what else would i need to bring the sound stage together pretty good, or is that all really for tha basic setup or is there anything extra, and should i take out my co-axial would that make it sound kinda crazy with running both
just tell me how much u gto to spend
crownvic02
Oct 29 2008, 07:59 PM
i'm down to spend around 500, gone run bout at most 6 pair of those 6inch subs gotta check to see if they gone fit in my door first going towards those 6 inch drivers whats tha dept of 6 inch drivers, do they make any smaller than 6"
Mister Terrific
Oct 29 2008, 08:09 PM
Should be enough room in your doors for the 6s not sure how deep they are though, are you planning on using the stock opening or fiberglassing some door pods?
caps
Oct 29 2008, 08:13 PM
QUOTE (crownvic02 @ Oct 29 2008, 08:59 PM)
i'm down to spend around 500, gone run bout at most 6 pair of those 6inch subs gotta check to see if they gone fit in my door first going towards those 6 inch drivers whats tha dept of 6 inch drivers, do they make any smaller than 6"
hell for 500 you could do (8) 8's and 4 supertweeters
crownvic02
Oct 29 2008, 08:17 PM
QUOTE (Mister Terrific @ Oct 29 2008, 08:09 PM)
Should be enough room in your doors for the 6s not sure how deep they are though, are you planning on using the stock opening or fiberglassing some door pods?
oh i'm gone have them fiberglassed in, but they will have to be at tha top of my door panel though
crownvic02
Oct 29 2008, 08:19 PM
QUOTE (caps @ Oct 29 2008, 08:13 PM)
hell for 500 you could do (8) 8's and 4 supertweeters
mind you that they are going in my doors lol
caps
Oct 29 2008, 08:20 PM
QUOTE (crownvic02 @ Oct 29 2008, 09:19 PM)
mind you that they are going in my doors lol
so... thats what im doing... and prolly more later on
Teezy aka Mister Terrific
Oct 29 2008, 08:22 PM
I got ya homie, I still think you got plenty of room up there. Local shop was considering putting another 6.5 in the same spot where you talking so I know its room there.
I kind of like caps idea, but if I was going that way, I would do (2) 8s and (1) super tweeter in the bottom of the doors.
Lol afraid not, but I dig the loud mid and highs setups yall run down there.
then we cool
Teezy aka Mister Terrific
Oct 29 2008, 08:35 PM
QUOTE (caps @ Oct 29 2008, 08:32 PM)
then we cool
Fa sho
G-Body Driver
Oct 29 2008, 08:50 PM
Selenium man is here!!!!
he can do 6's, they all loud as hell, give em power. The mounting depth fir the 6's is 2.9"... my personal rule of thumb is to use half the number of tweets to your woofers. meaning if you going to buy (8) 6's then buy (4) Tweets. depends on your sound preference, i know dudes who got nothing but mids in their cars (no tweets) and all you hear is talking from blocks over. You dont need 100 of them either,a couple of them in a car will hurt ya head after while
caps
Oct 29 2008, 09:05 PM
QUOTE (G-Body Driver @ Oct 29 2008, 09:50 PM)
Selenium man is here!!!!
i been here for a min
crownvic02
Oct 29 2008, 09:06 PM
yeah i was prolly gone go 2 in tha top panel of each door in my car and four across tha back dash in maybe one tweet per door how does that sound, what tweets should i go with
caps
Oct 29 2008, 09:09 PM
QUOTE (crownvic02 @ Oct 29 2008, 10:06 PM)
yeah i was prolly gone go 2 in tha top panel of each door in my car and four across tha back dash in maybe one tweet per door how does that sound, what tweets should i go with
i would go dt-150's in the doors and st-350's on the back deck
pm me a price on st's and i'll probably be able to grab a couple while i'm down there for tha classic, tha dept on those are to deep to go in a door though
caps
Oct 29 2008, 09:21 PM
QUOTE (crownvic02 @ Oct 29 2008, 10:19 PM)
pm me a price on st's and i'll probably be able to grab a couple while i'm down there for tha classic, tha dept on those are to deep to go in a door though
their drop shipped
caps
Oct 29 2008, 09:23 PM
damn i just called my dude to get a price and he said he cant be able to beat it by more than like $3 or so so buy from parts express and get the warranty
G-Body Driver
Oct 29 2008, 09:25 PM
QUOTE (caps @ Oct 29 2008, 10:05 PM)
i been here for a min
dont even try it!
caps
Oct 29 2008, 10:07 PM
QUOTE (G-Body Driver @ Oct 29 2008, 10:25 PM)
dont even try it!
i got this
(no )
G-Body Driver
Oct 29 2008, 10:09 PM
damn i just got done watchin George Lopez
caps
Oct 29 2008, 10:14 PM
QUOTE (G-Body Driver @ Oct 29 2008, 11:09 PM)
damn i just got done watchin George Lopez
i love that damn mexican
G-Body Driver
Oct 29 2008, 10:18 PM
on the low....me too....
crownvic02
Oct 29 2008, 10:33 PM
QUOTE (caps @ Oct 29 2008, 09:21 PM)
their drop shipped
ok would it work to have all four tweets fiber glassed into tha back dash or would that put tha sound out right
caps
Oct 29 2008, 10:42 PM
QUOTE (crownvic02 @ Oct 29 2008, 11:33 PM)
ok would it work to have all four tweets fiber glassed into tha back dash or would that put tha sound out right
i wouldnt personally fiberglass a back dash
Mr. Marauder
Oct 29 2008, 10:59 PM
Caps or G-body... Wut kind of amps & how many are y'all usin to push these? Extra Batteries? Just wonderin cuz Im into all the mids & highs and I wanna step my shit up. I honestly aint kno nuthin about selenium til i started postin on this site. & CrownVic, wut the price lookin like on the fiberglass work for ya doors?
caps
Oct 29 2008, 11:03 PM
QUOTE (Mr. Marauder @ Oct 29 2008, 11:59 PM)
Caps or G-body... Wut kind of amps & how many are y'all usin to push these? Extra Batteries? Just wonderin cuz Im into all the mids & highs and I wanna step my shit up. I honestly aint kno nuthin about selenium til i started postin on this site. & CrownVic, wut the price lookin like on the fiberglass work for ya doors?
their is a local shop here that does doors for $150 each but i have seen as much as 2K a door but for my mids/highs ima run 2 yellow tops
crownvic02
Oct 29 2008, 11:25 PM
QUOTE (Mr. Marauder @ Oct 29 2008, 10:59 PM)
Caps or G-body... Wut kind of amps & how many are y'all usin to push these? Extra Batteries? Just wonderin cuz Im into all the mids & highs and I wanna step my shit up. I honestly aint kno nuthin about selenium til i started postin on this site. & CrownVic, wut the price lookin like on the fiberglass work for ya doors?
basically what he said 150 a door and plus my back dash................so he gone hit me 650 i'm getting part of my door fiberglass basically tha area the speaker is gone be, and my whole back dash is gone be fiber glassed down with a vent for when i add subs so tha bass can flow through
crownvic02
Oct 29 2008, 11:28 PM
QUOTE (caps @ Oct 29 2008, 10:42 PM)
i wouldnt personally fiberglass a back dash
ok but would it sound right with tha four tweets in tha back, cause they wouldn't really work in tha doors without the fiber glass having to bulge way outside of the door
caps
Oct 29 2008, 11:35 PM
yea
crownvic02
Oct 29 2008, 11:40 PM
QUOTE (caps @ Oct 29 2008, 11:35 PM)
yea
oh ok thats whats up, and fuck yo opinon on fiberglassed back dash lol
caps
Oct 29 2008, 11:49 PM
QUOTE (crownvic02 @ Oct 30 2008, 12:40 AM)
oh ok thats whats up, and fuck yo opinon on fiberglassed back dash lol
the727kid
Oct 29 2008, 11:55 PM
glassing doors for $150? I hope that is just a small pod... materials will cost well over that for a full door.
crownvic02
Oct 30 2008, 12:11 AM
QUOTE (the727kid @ Oct 29 2008, 11:55 PM)
glassing doors for $150? I hope that is just a small pod... materials will cost well over that for a full door.
yep not tha whole door just partial, like you if you want tha top part of ur door glass and in lil other place like that
G-Body Driver
Oct 30 2008, 09:18 AM
QUOTE (the727kid @ Oct 30 2008, 12:55 AM)
glassing doors for $150? I hope that is just a small pod... materials will cost well over that for a full door.
Im going to try my own or let DC do it. But when 727customs was open they did doors for the L-O-W...i was talking about a full fiberglass dash and they quoted me $600 painted. They did that blue cutlass with the top cutoff on 6's round here, his entire interior is basically fiberglass and he paid more for his lift kit then his fiberglass.......
Depends on where and who you got to .
and i will be running (2) Kinetik 2400's in my car.
I also will be running (8) seleniums to start off so I got a 2-channel amp. (4) Seleniums can be wired down to 2 ohms, so (4) on each channel with at least 300W RMS is what you should look for, I mean even if you underpower them alot they still get loud as hell.
the727kid
Oct 30 2008, 10:16 AM
No wonder they went out of business QUICK. I'm not sure if I would trust fiberglass work that cheap. I know 727 did a half ass job on my boys alarm.
Teezy aka Mister Terrific
Oct 30 2008, 10:17 AM
QUOTE (G-Body Driver @ Oct 30 2008, 09:18 AM)
Im going to try my own or let DC do it. But when 727customs was open they did doors for the L-O-W...i was talking about a full fiberglass dash and they quoted me $600 painted. They did that blue cutlass with the top cutoff on 6's round here, his entire interior is basically fiberglass and he paid more for his lift kit then his fiberglass.......
Depends on where and who you got to .
and i will be running (2) Kinetik 2400's in my car.
I also will be running (8) seleniums to start off so I got a 2-channel amp. (4) Seleniums can be wired down to 2 ohms, so (4) on each channel with at least 300W RMS is what you should look for, I mean even if you underpower them alot they still get loud as hell.
I got a 2 channel amp that does 300w RMS per channel I planned to use it for my ID oem mids, but I may do something different.
G-Body Driver
Oct 30 2008, 10:31 AM
QUOTE (the727kid @ Oct 30 2008, 11:16 AM)
No wonder they went out of business QUICK. I'm not sure if I would trust fiberglass work that cheap. I know 727 did a half ass job on my boys alarm.
I only trust one guy and tht was Richard, he was barley there cuz he was always in jail but he been doing Car Audio and Mechanics for bout 20 years, and he worked at V.I.P. by my house and Bad to the Bone with Leo, he just couldnt stay outta jail...and his work was real good shit.
I got a 2 channel amp that does 300w RMS per channel I planned to use it for my ID oem mids, but I may do something different.
Well there you go.
KING_PROFESSOR
Oct 30 2008, 10:33 AM
QUOTE (G-Body Driver @ Oct 30 2008, 10:18 AM)
Im going to try my own or let DC do it. But when 727customs was open they did doors for the L-O-W...i was talking about a ......
when did 727customs close????
G-Body Driver
Oct 30 2008, 10:35 AM
not 727 customs, hell naw they aint closing.... we talking about tis little car audio shop called 727customs but nobody knew about em....they ran it out of a little garage next to a dairy hut.
727Customs the one you thinking about did my dawg Candy Green '07 Monte Carlo wit the gold 26's that i use to have in my signature.