Got this thing for 1K with 225K on the dash dude said it was a new motor (it was but it was a junkyard motor)

305 threw a rod

Now I have a 358 TBI with EBL www.Dynamic.com running the Motor

Just got a set of 22s for it and Plan on Dropping it 4-5" as much as can get


255/35/22


started off like this




Made my own grille (rip to it, it broke)













since I have a Lunati Voodoo cam in the 358, My dad decided to put the design on the hood










Motorless waitn for the 358 transplant








Just took a 2 hour drive to get wheels from NC (1:30 am pic)









Motors in




2 wheels on




Motors in and wheels on








Ill take more pics with the hood on soon think I have some more havent uploaded them yet

Future mods

Getting rid of the fender skirt and adding a fender flare to open the wheel well like a reg sedan

NOT MY CAR






and the Big drop Im getting on mine, this is actually the reason I got a wagon, I loved this guys car alot









Drops commin within a few weeks

Where you at in VA?

Fredericksburg

~30 mins above Richmond

Looks tight. Whats your plans for the stereo?

4 18" Mach 5 audio MJ 18s 20 cuft tuned to 32hz with a RF T1000bd for now When I get the subs in Ill sell the T1000 and get a Audioque 2200

stuff keeps hapening and I havent finished paying Mach 5 audio yet

Donet need much to get loud in that car, dude let me use a 12" pioneer powered of my 4 channel amp RF 450.4 ~ 150 watts rms or so it was NICE, if I did or tried that in my Torino it would have sucked period

oh ok..im actually in richmond right now

Looking good, been following your build on impss.. Make sure u take lots of pics when u do the fender flare mod

Word so your on Impalassforum whats your screen name on there?

wwwdotanthony92.. I been considerin cuttin my skirts on my classic

Dude had a set on the forum hes been tryin to sell for a minute I payed 165$ shipped, A guy wanted to sell them for 90$ shipped no one jumper on it, with the flare you can run a 315 tire No problem with not tubbing

Thats what I like I wanna run 295/30/22s in the back soon

better then i thought it would be.....good shit.100

THATS A VERY NICE BUILD...LOOKIN GOOD, DIFFERENT SO IM FUCKIN WIT IT

Your cars suck





no hate

here mines before and after
before



after

Not really into wagons but yours looks pretty good, congrats.

Got my system 2 18s my money ran short and I wanted something so I just got 2

LOL I know just 2

damn look at that box

Yeah....thats a big ass box!!

Yeah and its very very very Heavy thats 2 whole sheets of MDF and 1.25 box of 1lb Drywall screws,

Some how it moves when I turn it on LOL

Ill try to get some vids and get it Miced soon see how loud it realy is

It flexs everything and Im only running 900 rms to it, amp can do 1500 rms its a RF T1000bd

I cant imagine 4 18s in that car, Like i wanted to do LOL

Well I did so much shit its not eve funny lemme make a list and Ill post pics later today its 4:44am now lol



12 way Bonnicville seats
Rivera center console with the Control box molded in
Painted the woodgrain silver.
7" lcd for Car PC and EBL Wud (www.dynamicefi.com) I can put my laptop in my car and tune my soon to be even bad asser motor up
No Cats and Flomaster 40 series.
Dyed all the interior a brighter blue.
Cleaned the carpet.
Led Light on every spot you can think off.
Theater dimming circut that fades the lights off.
Bi Xenon E55 Projectors.
TPI Corvette intake
Raditor from an Lt1 car and Dual electric Fans
Working on new grille.


Thats all I can think of right at the moment


WHats next


BIG ASS DROP on the ground so low cant get over bussiness cards.
Satin Black paint
Tinted to hell.

oh 2 more 18s subs of course LOL

pix? and wats a bonnicville? but look like u been busy tho

Thats pretty much everthing I listed on the last post. Bi xenons, Seats, Leds, Console, uhhhhhhhhh damn cant think of it all but ive been busy

Here my old L03 305 burnout mark





358 TPI






Yes indeed. Looks good and pulls hard.

Where did you get your headlights at? And did you drop the wagon yet? Pics? Its looking good so far.

The headlights or Projectors? Well Ill tell you both.

A company called focuztech (i belive) sells Clear Lenses for Caprices/imps/ Roadies and OCC

The problem is the lack of fluting, it cant spread the beam. But there is a solution not as good as a projector but it can work. They now make a light for b bodies, that are clear but can actually spread the beam.


I got the projectors from a guy on www.hidplanet.com bought them for 100$, but I need a hid DS2 kit.


Naw havent dropped it yet. Plan on doing it soon, I cant pass inspection (or find someone too) car has no cats, and its extremly loud I plan on keeping it loud just have to get cats, Unfortunetly I have emmisions too so I cant skip the cats.

BTW the Cardboard thing I have is a Homemade Raiss (ultimate cold air intake) that im going to make.

nice build

Drop is coming this week it WILL be done by saturday (or it better be)

98 Pontiac Bonnieville. 12 way seats

How many inches you lowering it?. And what you using lowering springs? Spindle?.

And do those 12 way seats bolt right up to the factory plug for the stock seats?

lol i knew wat you meant...juz was messin wit ya (no homo) bout it...how much you got them seats for cuz them would look clean in my cutty

Im lowering it around 3-5" Im using sprint car race springs. They are about 10" tall ass opposed to 15" stock.

Im making brakets to raise the front to exactly where I want the car to sit at. Belive me I will be tucking.

But things happened again, so its on hold. I need a tranny and Im about to get one soon. TH350.


No those seats do not directly bolt in, or plug into factory anything.

They have a 9 button controller that controls both pass. and driver seat. So its a tad bit of wire tucking, and wiring to get them to work. Its realy not hard, but if your not a person that does that kinda stuff, it can be frustrating. (luckly im the person who does like this stuff)

The bolt pattern is the same as the stock capi, but are spread out 1.5" further. You need brakets to make them fit. There is talk of taking the rails off, but I have no idea how to do it.




I paid $140 for the entire set, with one rip. The ones I have go double of that. 300+

The 6 way ones can still go for 200.

I just was hanging out at junkyards, and saw and bought.

this is a nice build, keep us updated! lovin wagons!

12 second 1/4 mile mod coming over the winter.

what part of va you located in

Stafford.

im not into wagons..but this is a ncie build and sounds like it gonn ahave alil get up in it..and you already kno im diggin them seats...you mite have said sumwere in the thread but aint read it all so wat size rims and tires you plannin on goin wit? and wat kind of rims you plannin on

Im using the wheels I have Venti V33 22s, 255/35/22 front, and 295/30/22s for the rears. (right now its 255s all around, 2 dead tires in the back)

For the track switch over to 295/50/15 Just with a truck rally rims, or something of the sort.


I did some more interior work, I havent seen it done in any B body yet.

D body sill panels, B pillars, and carpet. ALong with the drop down mirrors from the Fleetwood.

I have a Blazer overhead console.


Rear bonnies are partially in, they are going to be electric relining B body first too.

Did you do the work from skirts to open wheel yet? Not sure if you posted that already How that turn out? I love me some wagons.

ya take sum pix of your progres wit all the seats ns tuff you got down to it bro

nice build that was alot for 2 pages lol

Well heres more.

12" Vga LCD for my car pc.












Heres the fleetwood stuff.






Oh the tach, cuz I mean bussiness.



It came out my dads camaro, he let me get it, for because I got him an intake.

Yeah its done heres pics. Its not finished yet, needs to be modled on.

that doesn't look to bad at all

yeah that looks good ..i like the skirts but you did a nice got gettin em cut off thats wats up ...can wait to see the paint on it

Yeah I dont like the current state of it, wheel sitts in too far, and my car sits to damn high, I dont like it.

I can bet you im the only one around my area with it, I havent seen anyone else with it done.

Its a Sports wagon now LOL


I plan on Satin Black, prolly John Deere Blitz Black (damn right its a tractor paint) as a matterfact the flares are sprayed in that color.

Lots of Rat rods use that color, and I like the satin look.

I realy want black 22s, anyone want to trade?