wanna lift your box or bubble or donk for 2s,4s,6s,8s, or shit even 30s
post ya questions here, no since for the same threads askin the same questions over and over

YOUR QUESTIONS WILL GET ANSWERED!!!


and some of the common questions that are asked have already been answered. just read
threw the pages, if u dont find the answer your looking for, then ask a questions,

can a s10 lift spindle fit a box chevy without any mods, or do i have to change anything

It will fit...but...u will need s10 rotors, s10 calipers, s10 brake pads..etc.......any more questions??

HOW MUCH CUTTING WILL I HAVE TO DO WIT JUST CUPS AND 295/35/24??(BUBBLE)

Not that much!!

DAMN THAT LOOKS LIKE MY SHIT, LOL. NOW I GOT A GOOD IDEA.

where yall getting them chrome trims from thats on the bubble

Huh??

DO YA'LL THINK 1'' ADAPTERS WILL MAKE THESE RIMS STICK OUT TOO FAR? AND DO THESE ADAPTERS LOOK GOOD?
http://cgi.ebay.com/ebaymotors/WHEEL-ADAPT...sspagenameZWDVW

HE TALKN BOUT THE WHEEL WELL PIECES

need some trailing arms on that bitch and itll be good

Na...u can go up to a 1 1/4inches and still not stick out...u good!!



Na...just need to let some of the air out the shocks!!

TRACE KNOW EVERYTHING!!!!! FORGET OBAMA AND HILARY, TRACE 4 PRESIDENT!!!

Do u have air shocks all the way around?????

THOSE ARE CUPS, THEY DONT MAKE AIR SHOCKS FOR DA FRONT.

LMAO...yall wild'n...i dont know everything...i just know enough!!

You can get them on Ebay - just search "Caprice wheel molding" they like $30

Whats size 24 inch tires can I put on the box withought cutting...I think I wanna go cups too for now...oh and when U install cups what else you need to do/buy?

U get u some trailing arms and extended arms with them cups and u can put a 305/35/24 tire a box without cutting!!

thanks bruh...



also whats a reasonable price for installing all this...I don't wanna get fucked (no homo) on the deal

4sho...so if u go with like a 295/35/24 tire...u will be more than good to go......as far as installation...cups, arms, trailing arms....around $500-600!!

u betta install that stuff yourself boy

I would NEVER recommend someone to do those springs if they dont know what they are doing...ive changed springs and put cups on them and all...I aint gona say im a pro....i know what im doing...and i done had a few pop loose on me....not a good experience AT ALL!!

True, i hate doing suspension simply for the fact that them springs can go through a brick wall....you gotta know what ur doing.

Key words right here!!

x2

Like i said...u just gotta know what you're doing.

I've done plenty of suspension mods in my driveway w/ nothing but a jack, 2 jackstands, and a spring compressor

I usually tie something to the spring when getting it out, and saying a prayer before putting it back in

what will i need n how much cutting for 26s with 305 /30/26 tires to fit my 1994 chevy impala changed my mind bout dem 275/25/26 toyo's

do u really need trailings arms and a arms when lifting?

NOT NEEDED BUT HIGHLY RECOMMENDED IF YOU WANNA SAVE YOUR TIRES AND NOT HAVE YOUR BACK WHEELS UP UNDER THE DAMN DOOR................................you make the call

Depends on how high u goin!!

What lift materials do I need for a lift that looks just like these. I'm trying to do 26's on a 1990 Box but I'm real picky about the stance. I hate alot of gap between the tire and fender, but I don't want the tire to sit close to the fender. And Also I wanna know how much cutting I'll have to do. Thankx.

Ur gona need cups, a-arms, trailing arms, and shocks!!

about 4-5 inches

I had a 4 inch lift on my old chevy...didnt have trailing arms...what size wheels u goin...and what kinda car??

What size cups?

Standard 3 inch cups!!

bubble caprice wit 24's.....i want it lifted but not crazy high. i hate the big gaps between the wheel wells

trace on a donk i fucked around last year and put truck springs on my donk ...
but it aint raise it too far just made it stiff as fuck so im gona take them back out
put my stock ones back on with cups in the front what else am i gona need?
295/35/24 1975 vert air shocks trailing arms on the back?
also going with the 454 motor far as weight

i have a 90 box chevy wit 23's on it i want to go bigger and right now the back tires seem to be kinda close to the back door so would extended trailing arms help wit that problem or would i have to do some cutting? the lift that i have on there is suppose to be a 7" but i think its more like a 5.....

Cups and airshocks is good...trailing arms is a maybe...u might or might not need them...we put 6s on my both of my cousins verts a few years ago without trailing arms and they came out real nice!!

Thats about a 4-5inch lift....but trailing arms will help out...and u wont have to cut anything!!

TRACE YOU THE MAN!!!!!!!!!!!!!!!!!!!!!!!!!!

Na...i aint the man...just tryin to help!!

will a 3 inch cup on a box chevy clear the 30 series tires nicely. not trying to be in the air..got some performance stuff on my motor

Yeah!!

good look

What size u goin??

my bad 24's with the 275/30/24

Ok...standard cups will do u just fine!!