[

That shit is tight but err'damn car don't need to be that hight but I give them a B

bigg tyme customs holla at twinky. Small shop trying to get big 704-363-1597 holla

posting more pics soon. burnt out on posting for the night

I SEE YOU DOING IT BUT IM REALLY NOT FEELING THE LIFT AS HIGH AS YOU WANT CRAZE.....I WAS DIGGIN' THE NO CUT NO RUB IDEA, WHICH I TOOK IT AS SAYING THAT THE CAR IS LIFTED TO FIT THE RIMS ON....BUT NOW ITS TO THE POINT THE RIM DOESNT MATTER ITS HOW HIGH CAN YOU GO AND IT TAKES AWAY FROM THE RIM...IMO

I WOULD LOVE TO LIFT MINE FOR 4s BUT JUST HIGH ENOUGH TO CLEAR THE RIM/TIRES W/ NO PROBLEM

BUT AGAIN GOOD JOB ON GIVING THE CUSTOMER WHAT HE/SHE WANTS

"If you aint sittin high..... park it!!!! "......... in the dirt

I have these same rims for my Cutty, his are missing the center caps though. I already know he had to use adapters because da smallest pattern they make dat rim in is a 5x5 and Cutty's have 5x4.75 patterns. Dats lifted aight, still a lil high though. I guessing dude didnt wanna cut. Bout how high of a lift is dat? Where are u located and how much did dat lift run ol'boy?

these people wanted there cars this high. He can put you as small as you want to go or as high as you want. the cutless is 12" and for prices call twinky 704-363-1597

where is the shop located?

charlotte north carolina on south blvd

I figured he was in NC cuz I think Ive seen a few of those cars in Greensboro.

I will never understand how someone could be scared to cut a $1,000 car.

I called him and he said dat green cut up top dat I quoted was lifted for 1800. I asked him what if I didnt want it dat high, maybe about 2 inches lower? He said dat was a 10" lift on dat for 1800 and he could do it a lil lower so say about 8" for 1550, which aint bad. He told me with a lift 2" lower than dat green one like I asked him for 1550, he said I was talking about some frame cutting. I was thinking to myself "of course, who doesnt cut their frame tucking 4z on a g-body?" I might roll with him, I gotta see some more G-bodys he has done though. Rollin704, Do u have anymore pics of this one, maybe from da front so I can see how straight his wheels are and from da side with no angle to see how much of a slant the car has?

I noticed he didnt say anything about a spindle, but Im assuming he uses them cuz I dont dat car is going to get dat high up front without them.

builds spindle exstentions and i'll try to get you some more pics. all cars he does have straight wheels no bowing around here

nice pics how much yall charge for yalls lifts get at me at yaboyprime@yahoo.com wit the info fam its appriciated

Why hate on my lift and this dude is doing the same thing? That's all...

http://i100.photobucket.com/albums/m20/big...insideofcar.jpg

Having an opinion is not hating

i see u got by boi twurk box chevy wit da flip flop paint and my brother trick lincoln silver wit the 24's. he got the red and black monte carlo wit 24's getting lambo doors there now.

any more pics of the lincoln?

AYE, HE DID MY CUZIN'S OLD CAPRICE TOO.. A 6" LIFT TO CLEAR 24'S... I GOTTA SAY THEY DO A PRETTY GOOD JOB FOR A STRAIGHT PRICE...

your lift is completely differtand looks unsafe sorry if for haten

http://i100.photobucket.com/albums/m20/big...y/underbody.jpg

I might get him to do my Cut, he said he can have it sitting a lil lower than the green one on da otha page. He said he did that one like dat cuz da guy didnt wanna cut. I dont mind cutting cuz it aint like its a benz or nothing. Besides I think it would look a lil better if it was bout 2" lower.

how much did he do dat bubble for, 704?

6 or 7 inch lift, i cant remember, but it was 700 bones...like i said pretty straight.. ppl was tellin us 2 with the 10 inch lift...that was i think 11 or 12 hundred. Like u were sayin, Just enuff to clear the 24s was what we went wit

Yea, dats straight for 7yrds....really ur cuzin can fit 6s on with da lift he has if he ever decides 2 go up in rim size...he'll just have 2 cut more off da frame.....who did his paint? looks pretty wet 2 be a base/clear. He told me 1550 for tuckin 4z on da G-body.

I DONT KNOW BRAH, THATS PUSHIN IT, THAT CAR HAD AN OK TURN...I MEAN WE COULDNT WHIP A U-TURN... AND HONESTLY THE 24'S BARELY FIT..
THE PAINT WAS NOTHIN SPECIAL..THE SAME PAINT AS WHEN THE CAR WAS BOUGHT..U CAN GET THAT DONE 4 BOUT 150 OR 200 BONES AT ECONO, SHIT NOW I THINK ON IT, THATS PROLLY WHER THA DEALER TOOK IT...ANYWAYS YEA THIS SHIT WAS A HOT TOPIC IN THA HOOD, BUT ITS SOLD WIT 22s NOW.

do u think dat 1550 is worth it?.....how long does it usually take him?

i would suggest you call him about the time, and ask specifically about your situation. Ours was a same day situation.. we dropped it off that morning, was able to come back that afternoon/evening. but thats was us, a bubble wit a six inch lift and 4's....
Pricewise, u said u wanted to "tuck 4'z on a G-body" we aint have them tucked, they actually stuck out a lil b/c of the rim adapters... so that would be different i guess, he should be able 2 explain why it would cost one price over another, he did when i asked about a 00' crown vic and told me y it cost so damn much, lol.

got more pics to post tonight, waiting for twinky to bring them over

Do dat do dat

Its gonna cost more for a G-Body anywhere u go because it involves a lil more than what he did to yours, u got a 6" lift where as Im looking at a 8". Plus he has to do more cutting with a G-Body...dats anywhere u go. And what I mean by tucked is, is how da red one sits over da rims, dats what we mean by tucked (fender is 2-3" over da tire not 7-8" over da tire like da green Cut is). It makes da rim look better and sometimes bigger on da car.

got about thirty more just have to scan pics to post them

so this twinky guy is doing installs at his house? if so, dude got some skills.
lifts look great! and nice compilation of pictures man,thanks for sharing

Where u at man?, Im ready da see

started out at his house but finally got a shop cause of all the trafffic

He's hooking the rides up.

pics being posted weekly. have alot of pics and all of them my boy did no bullshit. from tucking to hydro's to monster trucking anything you need he can fabricate. not like all of these people who do your car get your money and your on your own but the type of dude to always help you with any problem you might have and beleives in your car driving good not just looking good get at him twinky 704-363-1597

dude has skills no doubt


but this is a disgrace to a real imp

he wouldn't listen we all told him only had 86000 miles and was clean. his parent's bought it for him and he didn't care that's what he wanted so you can't say no to a customer

can't forget he did my personal car